Potential issue with PMDG 737-800 and FSiPanel using STAR approach

Post Reply
SquadronLeader
Posts: 64
Joined: Mon May 28, 2018 11:26 am

Potential issue with PMDG 737-800 and FSiPanel using STAR approach

Post by SquadronLeader »

J-P

Not sure whether this is an issue with FSiPanel or PMDG - so let me share what I am experiencing - which has only been happening since the latest PMDG update to the 737-800 (3.0.63) and WU12.

I have tried this with several different STAR approaches, and the outcome is the same. The latest STAR approach was into EGPK - RW12. The STAR was BLAC 1P and the waypoint TRN.

FSiPanel sets the plane up as normal, and request that I hold the brakes for 3 seconds to take control. Prior to doing so, I set up the FMC as usual, including the cruise altitude. All appears to be normal and I take control. Within about 60 seconds - everything freezes - and I lose the sound of the engines. Cannot do anything to release it. I have checked active pause, tried shift P and the ESC button, none of which releases the 'frozen' position.

Then tried the exact same STAR approach with the Fenix A320 and FSiPanel - and that worked perfectly. Also flew the PMDG 737-800 in free flight and that also worked perfectly.

Had another go at the same STAR approach into EGPK with the PMDG 737-800, and this time the 'freezing' occurred whilst I was programming the FMC, and before I had taken control.

As mentioned earlier - this situation has only occurred since the latest PMDG update, and of course WU12 - the FSiPanel STAR approaches with the PMDG 737-800 were working perfectly beforehand.

Hope this gives you enough info to look at from a FSiPanel perspective in case it is something that you can resolve. Just for your info, I have also posted a similar thread on the PMDG forum.
jpgarraio
Site Admin
Posts: 885
Joined: Fri Sep 15, 2017 10:30 am

Re: Potential issue with PMDG 737-800 and FSiPanel using STAR approach

Post by jpgarraio »

Hi,
Thank you for your message.

I just tried the same arrival with latest PMDG and no issues at all, I was able to land.

I will install WU12 now and try again.

Cheers,

J-P
Jean-Pierre Garraio
Developer
Image
jpgarraio
Site Admin
Posts: 885
Joined: Fri Sep 15, 2017 10:30 am

Re: Potential issue with PMDG 737-800 and FSiPanel using STAR approach

Post by jpgarraio »

Ok,

Just tried same approach with WU12 New Zealand installed.
No issues, no freeze.

Confirm you are talking about WU12 and not BETA SU 12?

I have no other reports for this issue.

Cheers,

J-P
Jean-Pierre Garraio
Developer
Image
SquadronLeader
Posts: 64
Joined: Mon May 28, 2018 11:26 am

Re: Potential issue with PMDG 737-800 and FSiPanel using STAR approach

Post by SquadronLeader »

J-P

Thanks for your response and for trying the STAR approach into EGPK.

I can confirm that I was talking about WU12 and not BETA SU 12.

Interestingly enough, I have now tried various other STAR approaches with both FSiPanel and the PMDG 737-800. One of these was the RNAV05 approach into NZQN and that worked perfectly - so I thought that whatever 'bug' I had had now resolved itself. Other STAR approaches also worked fine.

When I read your reply above, I once again tried the STAR approach into EGPK, and sure enough, everything froze before I had taken control of the plane.

So, guess I will let sleeping dogs lie.

Thanks again for looking at this.
Post Reply