Inibuilds A320neo v2 not working with FSIPanel

[Chanticleer]

Greetings!

I cannot get the new Inibuilds A329neo V2 that comes with the latest MSFS update to work properly. I have tried 3 times going step by step through your Inibuilds A320neo video and every time, after I have set the flaps to 1, the parking brake off and the throttles to CL, the plane immediately starts climbing and diving and reaches speeds greater than 300 knots at times.

The master warning light comes on and the plane never reaches the 2300 foot initial entry altitude. Eventually, FSIPanel says Aircraft Ready and to Hold your brakes for 3 seconds, but by that time I am at 7000 feet or greater and way out of position for the 31R approach.

I originally had some AI traffic set up in the Community folder, but even after removing everything except the latest AIRAC files, it still failed to work properly.

Is the FSIPanel set up to work with the original Inibuilds A320neo and not with the V2 version that comes with MSFS?

Best regards, Ron

[jpgarraio]

Hi Ron,

Sorry for the late answer.

All normal with iniBuilds A320 NEO v2 and FSiPanel, I just gave it a try. i suspect some issues with your CL detent or joystick calibration.
Have a look at the video below for you.

Ron Support video

Cheers,

J-P

[KlasseEke]

Hi,
Sorry to say, i have exactly the same problem.
ESGG runway 21, long approach.
Problem #1 When i set up the approach FSi selects flap 30. i want to change this to Full. When i click on the flap icon the app craches to Desktop.
Problem#2 When i click on Move Aircraft FSi tels me to set flaps to FULL, release P-Brake and set throttle to CL. When i do this the aircraft directly goes to TOGA LK and starts to accelerate madly. The A/THR indicates ON. Then OVERSPEED warning and disaster is a fact.
I have calibrated the TM rudder, stick and throttle several times.
The Fenix A320 works perfect.
What is wrong?

Best Regards
Klas Ekedorff
Sweden

[jpgarraio]

Hi,

I will give it a shot tomorrow and report back here.

J-P

[jpgarraio]

Hi,

Everything working as expected with the 320, I suspect an issue with your thrust calibration.
Please check the video below I made for you.

https://youtu.be/K96AcEBcewE

Cheers,

J-P

[KlasseEke]

Hi
Thanks for the video
Really good support
I have tried using the F3 variant to put the throttles in CL mode.
Unfortunately, the same error occurs.
I managed at one point to get it to work by disconnecting the A/THR and reconnecting it.
Then TOGO LK switched to SPEED.
But on the next try, it didn't work.
Another error (bug?) is that when I select airport and runway, FSi says flaps 30, but when I select MOVE AIRCRAFT, FSi says that I should set flaps FULL.
FSiPanel seems unstable on this particular aircraft, as the Fenix ​​A320 works perfectly.
Thanks again for the amazing support!

Have a nice weekend
Klas

[mrbigglesworth]

Have to agree with this, and to mirror another post I made - it's a shame that the inibuilds planes aren't getting more love. While I appreciate how well Fenix/PMDG is optimized I would really like to be able to use quick patterns with the a300 and Neo.

[jpgarraio]

Hi,

I can't reproduce your FLAPS 30 indication on the INI 320? Are you sure it says IniBuilds A320 Neo V2 in FSiPanel when you start it ?
Could you possibly make a video of what is happening on your A320, showing the aircraft sitting on the runway, FSiPanel started, select long final, click MOVE AC and then showing me the whole cockpit.

This is probably the only way I can try to figure out what is the issue as we do not get other reports on the iniBuilds A320.

Regards,

J-P

[jpgarraio]

Have to agree with this, and to mirror another post I made - it's a shame that the inibuilds planes aren't getting more love. While I appreciate how well Fenix/PMDG is optimized I would really like to be able to use quick patterns with the a300 and Neo.

It also depends on the addon's capability to accept complex inputs on their MCDU. To create a pattern, coordinates must be manually entered in the MCDU. The last versions of the iniBuilds and FBW addons did not allow that. Has this changed?