Page 1 of 1
CRJ v2 MSFS2020 No Pause before hold brakes
Posted: Fri May 30, 2025 10:01 pm
by marty
MSFS2020
CRJ v2
FSipanel with CRJ v2 update
Long ILS approach
Before Hold Brakes for taking control the CRJ does not pause.
It continues e.g. at approach speed e.g. 17 Kt.
The message to hold the brakes is on screen.
Another test with PMDG737-600 all ok.
Re: CRJ v2 MSFS2020 No Pause before hold brakes
Posted: Sat May 31, 2025 9:59 am
by marty
Just got the 100130 (new) update.
Re-testing.
Re: CRJ v2 MSFS2020 No Pause before hold brakes
Posted: Sat May 31, 2025 10:26 am
by marty
The pause is now working.
Have to Move twice before that works.
Cannot catch the glide slope.
Was the new version verified as working?
I stopped testing for now.
Re: CRJ v2 MSFS2020 No Pause before hold brakes
Posted: Sat May 31, 2025 5:18 pm
by marty
I tried a CRJ v2 MSFS2020 Downwind and back to the not pausing problem prior to setting brakes for 3 seconds.
Re: CRJ v2 MSFS2020 No Pause before hold brakes
Posted: Sat May 31, 2025 7:58 pm
by marty
Please move this topic to the MSFS2020 General Discussions.
Re: CRJ v2 MSFS2020 No Pause before hold brakes
Posted: Sun Jun 01, 2025 5:40 am
by marty
Tested again and noticed on a downwind setup:
The pause was actually moving the aircraft forward for 10 seconds then resetting back to the starting point.
Then repeating this forward / reset routine.
Adjusted speed to 220 Kts.
Holding brakes for > 3 seconds and then all is working.