FSiPanel forums

Hi, I have just downloaded the updated version of FSI Panel that includes in the SETUP/Scenarios page the possibility to set the buttons for the voice interaction in the scenarios.
After setting up everything, I tried the new LSGG-LSZH scenario in the "only voice" mode but I can't hear any voice from the VR headset.
Actually the scenario sistematically presents a pop window instead of sending the sound to the selected output; furthermore I have to say that the test button in the SETUP/Scenarios page always sends the sound to the system selected output, no matter which is the output selected in the box.
Anyway during the scenario action, it seems that the scenario itself reacts to the mic inputs, because the pop windows disappers after clicking the mic button and making the readback.
I think that something has to be tuned right now on the new scenario feature.

And by the way, the lesson dowload button for the new scenario doesn't work either.

Biagio

Hi,

did you download the new scenario VOICE activated?
If you go to SETUP / Scenarios, you will find 2 scenarios LSGG-LSZH, one is the old one without ATC voices and the second one down the list is the new one with Voice.

Then to check your sound, try to listen to the ATIS, select 123.45 on COM2 while sitting on ground, you should hear the ATIS, if not, you don't have the right scenario.

Let me know,

J-P

I was not aware that there were 2 scenarios for LSGG-LSZH, one with voice and the other without. Anyway now I have downloaded both, selected the voice one and ATIS works.
Thx

Bjdelta

Great, were you able to fly the scenario?