FSiPanel forums

Hello ,

FSiPanel version updated to 1.0.0.42

P3D 5.4.9
KDTW (KTDW was in the original post. Sorry my typo error so I later edited: should be KDTW).
Rwy 04R

FMC does not get programmed and ND naturally does not show the approach.

Also, upon later starting FSiPanel the Direct FAF is not saved from previous setup. It has reverted back to Direct RWY.

Hi,

I do not see any runway 04R in KTDW ?

Regards,

J-P

Hello,

That is the problem.

The FMC RTE Origin / Dest are not programmed by FSipanel.
The ILS frequency for KDTW rwy04R is programmed.

I later tested with P3D5 and PMDG737 and all ok.

ok I see, you wrote KTDW on your first message.
On the 777 P3D, FSiPanel cannot set the approach in FMC as a bug is causing CTD
I have made a video on this matter, it used to set the freq and approach but 50% of the time P3D crashed so I decided not do do it anymore.

You can see the video here : https://youtu.be/xx0e63IAgzg

Regards,

J-P

Thanks for the follow up.

I never got a CTD and I have not change destinations.

I did an unlisted video to show what worked for me a few days ago.



https://youtu.be/z_ZK79_xoiM