FSiPanel forums

JP

I notice recently that by programming an approach with a STAR and after selecting the waypoint you press move and FSIpanel asked for new weight and you give the weight: problem is : this is not transferred to the FMC, so landing speeds etc are not calculated

If you do a normal approach 8m miles out for instance there is no problem

any suggestions ?

Greetings

Karel

Hi Karel,

That is correct, FSiPanel will select an approach and set everything on Vectors, Final positions.
For the STAR or PilotWP, it will just set the ILS and let you configure the rest as you can still be far away from landing.

Regards,

J-P

thanks JP !