FSiPanel Crashes
FSiPanel Crashes
I set up the FSLa320 at KRDN with engines running. Select an airport and vectors to final, push Move A/C. Setup begins,but when the plane is airborne, FSiPanel closes and leaves the airplane just hanging there.
Re: FSiPanel Crashes
Hi,
Thanks for your report, Does it crash always at the same time?
Could you please send me the file log.txt just after it crashed.
You can send it to support at fsipanel .com
Cheers,
J-P
Thanks for your report, Does it crash always at the same time?
Could you please send me the file log.txt just after it crashed.
You can send it to support at fsipanel .com
Cheers,
J-P
Jean-Pierre Garraio
Developer

Developer

Re: FSiPanel Crashes
I will try to send it tomorrow, but it may not be until Monday.
Re: FSiPanel Crashes
This doesn't happen every time, but most of the time with the FSL A320. It wouldn't allow me to attach a text file for some reason, but here it is:
22.02 10:05:21 FSiPanel is alive
22.02 10:05:21 FSiPanel Splash form Started
22.02 10:05:22 Configuration file read
22.02 10:05:22 P3D version detected : 5.1
22.02 10:05:27 Configuration file read
22.02 10:05:29 Simconnect ok
22.02 10:05:30 Simconnect ok
22.02 10:12:03 Conversion from string "---" to type 'Integer' is not valid.
22.02 10:05:21 FSiPanel is alive
22.02 10:05:21 FSiPanel Splash form Started
22.02 10:05:22 Configuration file read
22.02 10:05:22 P3D version detected : 5.1
22.02 10:05:27 Configuration file read
22.02 10:05:29 Simconnect ok
22.02 10:05:30 Simconnect ok
22.02 10:12:03 Conversion from string "---" to type 'Integer' is not valid.
Re: FSiPanel Crashes
Ok thanks,
It seems to be related to the reading of your FCU by FSiPanel.
When you click Move AC, do you press SPD button?
FSiPanel is changing mode from managed to select speed initially, it then set the desired speed, if speed mode is managed, this will fail.
Please try the following:
Click MOVE AC when speed mode is selected and do not touch anything except thrust levers to CLB, working?
Try another approach but this time set managed speed before clicking move AC, you should see FSiPanel reverting to select speed before setting everything.
Let me know,
Cheers
It seems to be related to the reading of your FCU by FSiPanel.
When you click Move AC, do you press SPD button?
FSiPanel is changing mode from managed to select speed initially, it then set the desired speed, if speed mode is managed, this will fail.
Please try the following:
Click MOVE AC when speed mode is selected and do not touch anything except thrust levers to CLB, working?
Try another approach but this time set managed speed before clicking move AC, you should see FSiPanel reverting to select speed before setting everything.
Let me know,
Cheers
Jean-Pierre Garraio
Developer

Developer

Re: FSiPanel Crashes
I don't touch anything except Chaseplane views. I will try your idea.
Re: FSiPanel Crashes
Tried twice more. Same result. FSPanel crashes as soon as aircraft starts moving. Here is latest log.
23.02 16:30:14 FSiPanel is alive
23.02 16:30:14 FSiPanel Splash form Started
23.02 16:30:15 Configuration file read
23.02 16:30:15 P3D version detected : 5.1
23.02 16:30:20 Configuration file read
23.02 16:30:21 Simconnect ok
23.02 16:30:22 Simconnect ok
23.02 16:41:36 Conversion from string "---" to type 'Integer' is not valid.
23.02 16:30:14 FSiPanel is alive
23.02 16:30:14 FSiPanel Splash form Started
23.02 16:30:15 Configuration file read
23.02 16:30:15 P3D version detected : 5.1
23.02 16:30:20 Configuration file read
23.02 16:30:21 Simconnect ok
23.02 16:30:22 Simconnect ok
23.02 16:41:36 Conversion from string "---" to type 'Integer' is not valid.
Re: FSiPanel Crashes
Ok thanks, do you have latest version of the FSLabs Airbus installed?
Jean-Pierre Garraio
Developer

Developer

Re: FSiPanel Crashes
Latest Airbus and no hardware.