FSIPANEL does not allow me to take control

All subjects related to FSiPanel 2024
Post Reply
Walouigi
Posts: 2
Joined: Fri Dec 02, 2022 2:26 pm

FSIPANEL does not allow me to take control

Post by Walouigi »

Hi,
I just started to use it with HW A339, and when I ask for the move aircraft, 30 sec after, I see message plane is ready, hold brakes for 3 sec to take control but nothing happened, and the plane is frozen, but start a kind of a free drop.
Now I also tried FBW A20, and the minute, I say move aircraft, the plane , it got me up in the air, and then the plane got dropped and crashed to the ground. This is really bad, I cannot use it
Please advise why.
Thanks
jpgarraio
Site Admin
Posts: 1443
Joined: Fri Sep 15, 2017 10:30 am

Re: FSIPANEL does not allow me to take control

Post by jpgarraio »

Hi,

For the headwind and FBW, the message is asking you to switch off the BEACON light to take control, is that what you've done ?
For FBW, this is very strange as the aircraft is supposed to accelerate on the runway before getting airborne ? What aircraft is detected on the bottom left of your FSiPanel screen ?

Regards,

J-P
Jean-Pierre Garraio
Developer
Image
jpgarraio
Site Admin
Posts: 1443
Joined: Fri Sep 15, 2017 10:30 am

Re: FSIPANEL does not allow me to take control

Post by jpgarraio »

Sorry just realized you are flying on MSFS 2024...
Both Headwind A330 and FBW A320 are NOT yet supported by FSiPanel.

We are waiting for FlyByWire to release an official installer for their aircraft, we will then add support.

Regards,

J-P
Jean-Pierre Garraio
Developer
Image
Walouigi
Posts: 2
Joined: Fri Dec 02, 2022 2:26 pm

Re: FSIPANEL does not allow me to take control

Post by Walouigi »

Thank you so much, Really appreciated.
Thanks
Hani
Post Reply