CRJ v2 MSFS2020 No Pause before hold brakes

[marty]

MSFS2020
CRJ v2

FSipanel with CRJ v2 update

Long ILS approach

Before Hold Brakes for taking control the CRJ does not pause.
It continues e.g. at approach speed e.g. 17 Kt.

The message to hold the brakes is on screen.

Another test with PMDG737-600 all ok.

[marty]

Just got the 100130 (new) update.
Re-testing.

[marty]

The pause is now working.
Have to Move twice before that works.
Cannot catch the glide slope.

Was the new version verified as working?

I stopped testing for now.

[marty]

I tried a CRJ v2 MSFS2020 Downwind and back to the not pausing problem prior to setting brakes for 3 seconds.

[marty]

Please move this topic to the MSFS2020 General Discussions.

[marty]

Tested again and noticed on a downwind setup:

The pause was actually moving the aircraft forward for 10 seconds then resetting back to the starting point.
Then repeating this forward / reset routine.

Adjusted speed to 220 Kts.

Holding brakes for > 3 seconds and then all is working.