Push to Talk Button

[mvanbrus]

Hi JP,

I like to request support for the Bodnar Joystick card. Many cockpit builder use these in their cockpits including myself. I use a Logitech Dual Action for the Push_To_Talk buttons at the moment.

Thank
Martin

PS0083.jpg

[jpgarraio]

Hi Martin,

i do not have such a controller, is it recignized by windows?
Have you tried to select all the BU0836A from the list and press your desired PTT? any button turns green?

Regards,

J-P

[mvanbrus]

Hi JP,

Yes, it is recognized by windows and tested all buttons. Have been using these joystick interfaces for years. No buttons turn green in FSIpanel. Here is the link to the interface.
https://www.leobodnar.com/shop/index.ph ... cts_id=204

Martin

[jpgarraio]

Ok, unable to test without hardware...
If recognized by Windows, it should work in FSiPanel most probably.

When you look at available controllers, you can see several controllers with the same name "BU0836A", can you try to select one by one these controllers and see if pressing your desired PTT turns a button green?

Regards,

J-P

[mvanbrus]

Hi JP,

Tested on my office computer and it works. Windows 11 sees the buttons on my cockpit computer but not Fsipanel. Need a deeper investigation on my side. Long wires and or overclocking.

Thanks
Martin

[HerbVillers]

Just purchased the advanced version for MSFS2020 and P3D

In the MSFS2020 version everthing works fine and I am able to assign my controller buttons to PTT or flow
and I can see the name of the controller eg HOTAS / gladiator etc etc

In the P3D version 1.0.042 as controller name I only see "Microsoft-PC-Joysticktreiber" ( I have 8 of them )
I have to go thru the list to find where my requested button is working ..
is that "normal" in P3D

[jpgarraio]

Hi,

P3D has still the old module for Joystick control.
Did you manage to make it work on your hardware?

Regards,

J-P