Fenix A320 Right bank
Fenix A320 Right bank
Hi, every one. During my trainigs i faced with such trouble. Almost every approach during the flare, at altitude aproximatly 40 feet plane experiencing severe Right(!) banking without any visible reason. My joy is ok, becides, it happens not every time. Have who ever had such proplem? The plane is Fenix A320. Thanks!
Re: Fenix A320 Right bank
Hi, very strange, are you flying manually when it banks?
Can you make a video?
Cheers,
J-P
Can you make a video?
Cheers,
J-P
Jean-Pierre Garraio
Developer
![Image](https://www.fsipanel.com/DL/logo2small.png)
Developer
![Image](https://www.fsipanel.com/DL/logo2small.png)
Re: Fenix A320 Right bank
This and other quirks with the Fenix flight model will be addressed by the upcoming v2, at least as far as the Fenix team leader has announced.
Re: Fenix A320 Right bank
Thanks everyone for your answers. Yes, I fly manually from the 4th mile. I will try to attach the video tonight or tomorrow. This problem does not always manifests itself, but quite often and strongly affects the quality of landing. The reason for this could not be found by myself. And yea, this happens only with FSI and never in «usual» flight.
Re: Fenix A320 Right bank
The only reason it could be related to the Scenario setup is if the approach and landing speed and configuration aren't correctly calculated and/or there is significative wind which one should compensate for in terms of target speeds.sevatc85 wrote: ↑Tue Jun 13, 2023 2:40 pm Thanks everyone for your answers. Yes, I fly manually from the 4th mile. I will try to attach the video tonight or tomorrow. This problem does not always manifests itself, but quite often and strongly affects the quality of landing. The reason for this could not be found by myself. And yea, this happens only with FSI and never in «usual» flight.
I experience it from time to time irrespective of using FSIPanel. Actually I only "discovered" FSIPanel a few weeks ago
![Smile :-)](./images/smilies/icon_e_smile.gif)
Regarding the upcoming features / fine tuning / fixes coming with v2 of the Fenix A320, please checK
Re: Fenix A320 Right bank
https://fenixsim.com/blog/entries/2023- ... niversary/sevatc85 wrote: ↑Tue Jun 13, 2023 2:40 pm Thanks everyone for your answers. Yes, I fly manually from the 4th mile. I will try to attach the video tonight or tomorrow. This problem does not always manifests itself, but quite often and strongly affects the quality of landing. The reason for this could not be found by myself. And yea, this happens only with FSI and never in «usual» flight.
As you can check reading down on that announcement to the paragraph that starts :
"Additionally to all the above, the flight model itself has not been forgotten, and a considerable amount of work has been done polishing off certain phases of flight that were suboptimal. This itself took a few hundred hours of investigation and tuning to ensure the behaviour was just as desired, but we hope you all feel these improvements in your day-to-day flying experience.
The fixes were targeted at improving a few specific and critical flight regimes, namely:
Crosswind Takeoffs
Crosswind Landings
Takeoff pitch input for rotation
Landing Bouncy Castle Super Fun Times"
it is inherent to the model and not because you're using FSI. Probably just a coincidence.
Also when using FSIPanel with the Fenix A320 don't forget to properly set the aircraft loading on the Fenix EFB before you load the situation you want to train, unless it's a Scenario with it's own settings.
Re: Fenix A320 Right bank
Hi everyone, Im here again. Interesting thing. When i starting from short final, my problem is here, but i tried to start from the long one - everything is ok. I made about 10-15 approaches one after one and didnt catch this issue. The reason unknown.
Re: Fenix A320 Right bank
Maybe you can try to change the default long final in FSiPanel from 4 to 5NM in SETUP / OPTIONS or try to program a 5NM FINAL by clicking on:
Select FIX, X NM Final, type 5, accept profile altitude and then MOVE AC.
Do you have this issue at 5NM ?
Cheers,
J-P
Select FIX, X NM Final, type 5, accept profile altitude and then MOVE AC.
Do you have this issue at 5NM ?
Cheers,
J-P
Jean-Pierre Garraio
Developer
![Image](https://www.fsipanel.com/DL/logo2small.png)
Developer
![Image](https://www.fsipanel.com/DL/logo2small.png)